Skip to content

📍 East Tamaki - 212c Burswood Dr. 📞 0800 315 3887 | Open 7 Days
📍 Mt Albert - 648 New North Rd. 📞 0800 315 3897 | Open 6 Days
📍 Hamilton - 87a Greenwood St. 📞 0800 315 3877 | Open 6 Days
📍 Christchurch - 25 Battersea St. 📞 0800 315 3867 | Open 6 Days

📍 East Tamaki - 212c Burswood Dr. 📞 0800 315 3887
📍 Mt Albert - 648 New North Rd. 📞 0800 315 3897
📍 Hamilton - 87a Greenwood St. 📞 0800 315 3877
📍 Christchurch - 25 Battersea St. 📞 0800 315 3867

Jumper Leads 400A 2.5m Mechpro-MPBCBL400

Original price $22.00 - Original price $22.00
Original price
$22.00
$22.00 - $22.00
Current price $22.00
Features
  • Suits small to mid-size vehicles
  • Fully insulated battery clamps
  • Ergonomic handle design
  • 2.5m cable length
  • 1 Year Warranty

Mechpro Jumper Leads 400A 2.5m

Suiting medium cars and vehicles, these jumper leads from Mechpro will have your vehicle battery springing back to life in no time

Make sure you follow the instructions on the pack before connecting your jumper leads. Make sure the batteries are of the same voltage, make sure the car's don't touch, make sure the engines are off, the car is in neutral or park and the handbrake is on before connecting the battery jumper cables.

Vehicle starting sequence for negatively earthed vehicles:

  1. Connect the RED lead to the positive + terminal of both vehicles batteries.
  2. Then connect the BLACK lead to the negative - terminal of the boosting battery and then the engine block of the vehicle with the FLAT battery.
  3. Start the engine of the BOOSTING vehicle and allow engine to idle normally.
  4. Start the engine of the vehicle with the FLAT battery and allow engine to idle normally.
  5. Once the engine of the vehicle with the FLAT battery is idling normally, turn off the BOOSTING vehicle and disconnect the booster cables in the reverse order.