Penrite Universal Top Up Premix Coolant 1L - AFABPMXYELLOW001
Universal Coolant Top Up is a Type A Anti-Freeze Anti-Boil Coolant Premix that can be mixed with ALL COOLANT and INHIBITOR TYPES including those that contain ethylene glycol and long life, low depletion rate inhibitors.
It is light yellow tinted and will NOT DISCOLOUR existing coolant if not mixed at greater than 10% of system capacity. There is no limitation on the amount of Universal Coolant Top Up that can be used in the cooling system and it can be mixed with all coolants types regardless of colour.
It is a 50% concentration formulation and is ready to use directly from the container. It is pre-mixed with de-mineralised water and can be poured directly into the cooling system. No further dilution is required.
| Mix Ratio | 50% |
| Freezing Point | -38°C |
| Boiling Point | +109°C |
AFABPMXYELLOW001 - 1 Liter
Special order item - usually available within 24 hours
Features:
- Compatible with all coolant types.
- Will not discolour original coolant.*
- Compatible with plastics, rubbers and seals.
- Protects all internal surfaces from corrosion, including aluminum.
- Long life coolant & inhibitor pack.
- Phosphate free formulation.
- Ready to use - no mixing.
*Universal Coolant Top Up will not discolour existing coolant provided that it is not mixed at greater than 10% of system capacity.
Instructions for Use:
- Allow cooling system to cool sufficiently before proceeding.
- Remove radiator cap or overflow reservoir cap.
- Add directly to the cooling system via radiator or overflow reservoir.
- Replace radiator or reservoir cap securely.
Please Note:
Premix coolants do NOT require further dilution with demineralized water
Please use the correct fluid to avoid mechanical breakdown. Check your owner's manual if unsure.