East Tamaki - 212c Burswood Drive
0800 315 3887
Open 6 days: Mon-Fri 9am-5pm, Sat 9.30am-12pm
Mount Albert - 648 New North Rd
0800 315 3897
Open 6 days: Mon-Fri 9am-5pm; Sat 10am-3pm

150W SOLAR PANEL 150W MONO SOLAR PANEL

$169.00

FREE SHIPPING

Compare

Description

FREE SHIPPING

150W SOLAR PANEL
150W PANEL
150W SOLAR
150W MONO SOLAR PANEL

50W SOLAR PANEL
100W SOLAR PANEL
150W SOLAR PANEL
200W SOLAR PANEL

Dimensions
1200mm x 680 mm x 30 mm

TECHNICAL DATA SHEET
Technical Data
Type
Type of Solar Cell Mono-crystalline,
Number of Cells 36 pcs
Size of module
Module, Weight 9.5 kg
Connector / Cross-Section Junction Box
Cables, Length (+/-) Customizable
Front Cover Glass Safety Glass
Front Cover Glass, Thickness 3.2 mm
Frame Anodized Aluminium

Electrical Data
Maximum Power PMPP STC 150W
Power Tolerance ?STC +3%
Maximum Power Voltage UMPP STC 18.9V
Maximum Power Current IMPP STC 7.95A
Open Circuit Voltage UOC STC 22.3V
Short Circuit Current ISC STC 8.79A
Cell Efficiency ?STC 21 %
Maximum System Voltage UDC 1000V
STC: Irradiance 1000 W/m²;Spectrum AM 1.5;Cell Temperature 25°C, Wind 0 m/s
Temperature Coefficients

Power Coefficient ak(PMPP) -0.50±0.05%/K
Voltage Coefficient ßk(Uoc) -0.35±0.01%/K
Current Coefficient Fk(Isc) 0.065±0.015%/K
Certifications
IEC 61215, IEC 61730 ,TUV, CE, ISO9001:2000

Power Warranty
10 years performance warranty to 90 %

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Quick Comparison

Settings150W SOLAR PANEL 150W MONO SOLAR PANEL removeProjecta Switch Starter Cable 610mm (Large) BCS0-61 removeBATTERY CHARGER 12v 20 amps 8 Stage SP61085 removeProjecta Fused Battery Distribution Terminal BT950-P1 removeThunder 100AMP VSR Programmable Dual Battery Isolator Voltage Sensitive Relay TDR15100 removeProjecta Battery Charger Projecta AC080 6v-12v 8a 8 Stage Battery Charger remove
Image150W SOLAR PANEL 150W MONO SOLAR PANEL150W SOLAR PANEL 150W MONO SOLAR PANEL150W SOLAR PANEL 150W MONO SOLAR PANEL150W SOLAR PANEL 150W MONO SOLAR PANEL150W SOLAR PANEL 150W MONO SOLAR PANEL150W SOLAR PANEL 150W MONO SOLAR PANEL
SKUMONO-150WBCS0-61SP61085-1BT950-P1TDR15100AC080
Rating
Price$169.00$38.59 $399.95$98.12$79.00$175.30
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionFREE SHIPPINGTDR15100-A
Content

FREE SHIPPING

150W SOLAR PANEL
150W PANEL
150W SOLAR
150W MONO SOLAR PANEL

50W SOLAR PANEL
100W SOLAR PANEL
150W SOLAR PANEL
200W SOLAR PANEL

Dimensions
1200mm x 680 mm x 30 mm

TECHNICAL DATA SHEET
Technical Data
Type
Type of Solar Cell Mono-crystalline,
Number of Cells 36 pcs
Size of module
Module, Weight 9.5 kg
Connector / Cross-Section Junction Box
Cables, Length (+/-) Customizable
Front Cover Glass Safety Glass
Front Cover Glass, Thickness 3.2 mm
Frame Anodized Aluminium

Electrical Data
Maximum Power PMPP STC 150W
Power Tolerance ?STC +3%
Maximum Power Voltage UMPP STC 18.9V
Maximum Power Current IMPP STC 7.95A
Open Circuit Voltage UOC STC 22.3V
Short Circuit Current ISC STC 8.79A
Cell Efficiency ?STC 21 %
Maximum System Voltage UDC 1000V
STC: Irradiance 1000 W/m²;Spectrum AM 1.5;Cell Temperature 25°C, Wind 0 m/s
Temperature Coefficients

Power Coefficient ak(PMPP) -0.50±0.05%/K
Voltage Coefficient ßk(Uoc) -0.35±0.01%/K
Current Coefficient Fk(Isc) 0.065±0.015%/K
Certifications
IEC 61215, IEC 61730 ,TUV, CE, ISO9001:2000

Power Warranty
10 years performance warranty to 90 %

BCS0-61
Suitable for trucks, tractors and earth moving equipment. Tin plated copper lugs to suit 10mm studs. Annealed copper cable with PVC insulation. Durable polyolefin heat shrink for protection. Terminal ends mechanically crimped. Specifications: Cable length: 610mm Cable Diameter: 70mm2 12 Month Manufacturer Warranty
SP 61085

• Current Output: 20 Amp • Output Voltage (Nom): 12 Volt • Battery Type Supported: Gel/Calcium/Lead Acid - AGM • Charge Stages: 8 Stages

FEATURES • Built-in microchip charging control and monitoring system. • Zero volt minimum start – can charge a completely flat batter y. • Optimally designed charging cycle designed for Lead Acid / AGM, Gel, & Calcium, starting and deep cycle batteries. • Automatic adjustment of charging voltages according to environmental temperature. • Overcharge protection, protecting the battery from damage due to overcharging. • Reverse polarity, short circuit, overload and high temperature protection. • LED display percentage of battery charge, larger • Battery Testing function while charging (faulty batteries cause the full battery bar display to flash).
BT950-P1 Converts your positive battery post into three outlets with fuse protection. Perfect for 4WDs and caravans where multiple accessories or dual battery systems are in use. 12 Month Manufacturer Warranty

Thunder VSR TDR15100

Protect Your Start Battery from Excessive Discharge and Allow Your Auxiliary Battery to Supply Non-Essential Loads when You Simultaneously Charge Two Batteries from Your Alternator.
Designed for The Working Adventurer, Thunder Products Have Been Tested and Developed to Handle Anything You Can Throw at Them without Breaking the Bank.
The Thunder Battery Isolator Is a User-Programmable Electronic Isolator that Will Allow the Auxiliary Battery to Be Charged Using the Vehicle’s Charging System. the Batteries Are Connected and Isolated Depending on The Levels Set by The User. This Means that Once the Start Battery Reaches a Predetermined Voltage (default Is 13.7 V), the Thunder Battery Isolator Will Connect the Batteries and The Auxiliary Battery Will Start Receiving a Charge. the Batteries Will Remain Connected until The Main Battery Voltage Drops Below the Chosen Level (default Is 12.8 V).

Features:
- Fully programmable engage, disengage, alarm voltages and times
- 100 Amp continuous rated
- Remote monitoring option
- Jump start function option
- Will allow reverse charging from auxiliary battery

Connect voltage: 9.2 – 16.0 V
Isolate voltage: 9.0-15.8 V
Visual alarm voltage: 9.0-15.6 V
Delay: 1-255 seconds
Mount (C-C0: 100mm
Maximum continuous current: 100 Amps
Maximum inrush current: 400 Amps
Standby current: 0.04 Amps
Maximum temperature: 80 Degrees
Dimensions: 110mm (L) x 90mm (W) x 72mm (H)

Superstart Batteries Limited East Tamaki

Free Shipping Nationwide

Projecta AC080

Projecta Charge N' Maintain Automatic 12V 8000mA 8 Stage Battery Charger Projecta Charge N' Maintain AC080 Automatic 12V 8000mA 8 Stage Battery Charger AC080 Projecta Charge N' Maintain AC080 Automatic 12V 8000mA 8 Stage Battery Charger

Battery Charger Car battery charger Projecta Projecta Battery Charger

PART NO AC080

The new and improved Charge N’ Maintain is perfectly suited to the DIY’er. No fuss options mean you can simply hook them up and the charger will do the rest. Projecta’s Charge N’ Maintain range offers a safe and practical method for charging all your automotive and marine batteries.

Projecta Charge N’ Maintain Chargers are ‘Smart Chargers’. This technology offers switchable charging stages that ensure an accurate and efficient charge for your battery. This allows longer life and better performance for your battery over extended periods of time.

Projecta’s Charge N’ Maintain Smart Chargers communicate with the battery and ascertain its level of charge. This allows the charger to balance its load and optimise its charging methods to ensure charging is stopped when the battery reaches capacity.

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
X